eFoam-W Series
W
Density： 25-460kg/m3
Foam Expansion ratio： 2~40
Thickness： 0.15-6.4mm
Width： 600~2000mm
| W.. | General grade |
|---|---|
| WN. | Flame retarded product, complies with the requirements of UL 94 HF-1 & FMVSS 302, and RoHS |
| WE. | Soft touc |
| WEE | Softer than WE grade |
| WTF | Better elongation, tensile strength, and back glue than W. |
| WTEF | Softer than W |
| WTTF | Better tensile strength than WT. |
| WQ. | Washer applications with easy clea |
| W6* | Electro-conductive product |
| WB. | Anti-bacterial product |
| WUV. | UV resistant product |
| WM. | Good thermal molding |
| WG. | Good compression set and thermal molding |
| WS. | Improved vacuum thermal molding |
| WP. | PP product with good vacuum thermal molding and dimensional stability |
| WL. | Light, hard, excellent stiffness. |
The eFoam-W series are polyolefin foam crosslinked by electron beam (EB) radiation without chemical cross-linker. These are closed-cell polyolefin foam products and can be supplied in rolls and sheets.
1. Roll product with thickness 0.15~6.4mm (single layer), and up to 50mm(laminated layers)
2. Crosslinked polyolefin foam manufactured with electron beam (EB) radiation ensuring excellent homogeneous properties.
3. The product presents fine smooth surfaces with an even and closed cell structure
4. Wide process temperature (-80℃~110℃, For customized specifications, this temperature range can be increased to 120℃
5. Excellent thermal insulation material
6. Excellent impact acoustic insulation
7. Extremely low water absorption or moisture penetration rate
8. Good weatherability
9. Good chemical resistance
10. Suitable for thermal and vacuum molding
11. The crosslinked pe foam is non-toxic, odorless and has no volatile organic compounds (VOC)
12. Meets Taiwan EPA Eco Label - 1st Category.
13. Complies with European Union (EU) RoHS requirements
14. The clean foaming production process is without CFCs, HCFCs, plasticizer, organic solvent
15. Choice of hardness of the products with multi-functional performances
16. With a flame-retarded grade product (WN, meets the requirements of UL 94 HF-1 & FMVSS302 )